Sony Handycam HDR-HC1E Operating Manual Download Page 13

Page: 13 / 119

Getting Started

HDR-HC1E 2-631-478-11(1)

• Typical recording time shows the time when

you repeat recording start/stop, turning the
power on/off and zooming.

Playing time

Approximate time (min.) available when
you use a fully charged battery pack.

HDV format pictures

Battery pack

LCD panel

opened*

LCD panel

closed

NP-FM50
(supplied)

105

115

NP-QM71D

255

285

NP-QM91D

390

430

DV format pictures

Battery pack

LCD panel

opened*

LCD panel

closed

NP-FM50
(supplied)

125

145

NP-QM71D

305

355

NP-QM91D

465

535

When the LCD backlight turns on.

On the battery pack

• Before changing the battery pack, slide the

POWER switch up to OFF (CHG).

• The CHG (charge) lamp ﬂashes during

charging, or the battery information (p. 27) will
not be correctly displayed under the following
conditions.
–  The battery pack is not attached correctly.
–  The battery pack is damaged.
–  The battery pack is fully discharged. (For

Battery Info only.)

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when
the mains lead is disconnected from the wall
socket.

• Use the supplied or optional Sony

“InfoLITHIUM” battery pack (M series). You
cannot use the battery pack NP-FM30 with your
camcorder.

• When attaching an optional video light, it is

recommended that you use a NP-QM71D or
NP-QM91D battery pack.

On the charging/recording/playback time

• Times measured with the camcorder at

25 °C (77 °F) . (10 to 30 °C (50 °F to 86 °F) is
recommended.)

• The recording and playback time will be

shorter when you use your camcorder in low
temperatures.

• The recording and playback time will be shorter

depending on the conditions under which you
use your camcorder.

On the AC Adaptor

• Use the nearby wall socket when using the AC

Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

PRECAUTION

• Even if your camcorder is turned off, AC power

(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.

Summary of Contents for Handycam HDR-HC1E
























































































































Search results

Summary of Contents for Handycam HDR-HC1E

Reviews:

Related manuals for Handycam HDR-HC1E

Brands by name

Popular brands

Sony Handycam HDR-HC1E, Operating Manual

Search results

Summary of Contents for Handycam HDR-HC1E

Reviews:

Related manuals for Handycam HDR-HC1E

Brands by name

Popular brands