GB
Using the built-in
projector
(HDR-GWP88/
GWP88E/GWP88V/
GWP88VE)
You can use a flat surface such as a wall as
a screen to view recorded images using the
built-in projector.
1
Pull out the stand.
2
Face the projector lens towards a
surface, such as a wall, and then
press PROJECTOR.
3
When the operating guide
screen appears, select [Project].
This screen appears the first time you use
the built-in projector after the camcorder
is turned on.
4
Adjust the focus of the projected
image using the PROJECTOR
FOCUS lever.
The projected image is larger when the
distance between your camcorder and the
reflecting surface increase.
It is recommended that you place the
camcorder about 0.5 m (1.6 feet) or further
away from the surface that the images are
to be projected onto.
PROJECTOR FOCUS lever
