97
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
HDR-CX560VE/CX700VE
You can set the area.
Tips
If [Auto Area ADJ] is set to [On], the area
setting (date and time) will be adjusted
automatically using GPS signals.
Auto Clock ADJ (Auto clock
adjustment) (HDR-CX560VE/
CX700VE)
The camcorder can maintain accurate
time automatically by acquiring time
information from the GPS system.
On
Maintains accurate time automatically.
Off
Does not maintain accurate time using the
GPS system.
Notes
You must set the date and time on your
camcorder before using your camcorder (p. 18).
There may be discrepancies of a few seconds
even if [Auto Clock ADJ ] is activated.
This function automatically adjusts the clock
when the camcorder receives GPS signals and
finishes triangulating successfully while the
power is on. Once the clock is adjusted, it will
not be adjusted until the next time you turn the
camcorder on again.
The clock may not be adjusted to the correct
time automatically using the GPS system,
depending on the country/region selected for
your camcorder. In this case, set [Auto Clock
ADJ ] to [Off].
Auto Area ADJ (Auto area
adjustment) (HDR-CX560VE/
CX700VE)
The camcorder can compensate for time
differences automatically by acquiring
location information from the GPS system.
On
Compensates for time differences
automatically.
Off
Does not compensates for time differences
automatically.
Notes
You must set the date and time on your
camcorder before using your camcorder (p. 18).
There may be discrepancies of a few seconds
even if [Auto Area ADJ] is activated.
The camcorder may not compensate for the
time difference automatically, depending on the
country/region selected for your camcorder. In
this case, set [Auto Area ADJ] to [Off].
