Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
AUTO
Normal setting (outputs the signal according to the TV automatically).
1080p
Outputs the 1080p signal.
1080i
Outputs the 1080i signal.
720p
Outputs the 720p signal.
576p
Outputs the 576p signal.
SD CONTENTS
Set the output image resolution recorded with standard definition image quality (SD).
AUTO
Normal setting (outputs the signal according to the TV automatically).
576p
Outputs the 576p signal.
576i
Outputs the 576i signal.
DISP OUTPUT (Display output)
You can set where the screen displays are to be output.
Steps
(MENU)
[OUTPUT SETTINGS] (under [GENERAL SET] category)
[DISP OUTPUT]
a desired setting
LCD PANEL
Shows displays such as the time code on the LCD screen.
V-OUT/PANEL
Shows displays such as the time code on the LCD screen, and on the TV
screen.
CLOCK/ LANG
CLOCK SET
See page 22.
AREA SET
You can adjust a time difference without stopping the clock. Set your local area when using
your camcorder in other time zones. Refer to the world time difference on page 115.
Steps
(MENU)
[CLOCK/ LANG] (under [GENERAL SET] category)
[AREA SET]
set your local area using
/
AUTO CLOCK ADJ (Auto clock adjustment) (HDR-CX500VE/CX505VE/CX520VE)
Your camcorder will maintain the correct clock time by acquiring the time from GPS.
Set the GPS switch to ON in advance.
Steps
(MENU)
[CLOCK/ LANG] (under [GENERAL SET] category)
[AUTO CLOCK ADJ]
a desired setting