Sony Handycam HDR-AX2000E Operating Manual Download Page 42

Page: 42 / 116

Play back movies.

Touch the recording media you want to play back.

: Memory card A

: Memory card B

Touch the playback mode, and select the desired image quality of movies.

: High definition image quality (HD)

: Standard definition image quality (SD)

Touch twice the thumbnail of the movie you want to play back.
The first touch will show the information on the movie at the lower part of the screen.

Date and time of recording started

Resolution

Frame rate

Record mode

Duration

Time code of recording started
Time code will not be displayed correctly when you play back the memory card with no time
code, or the memory card with time code that your camcorder does not support.

•

appears with the movie that has been most recently played back or recorded. If you touch the

movie with

, you can continue playback from the previous time.

Playback mode

Playback (Continued)

Summary of Contents for Handycam HDR-AX2000E





















































































































Search results

Summary of Contents for Handycam HDR-AX2000E

Reviews:

Related manuals for Handycam HDR-AX2000E

Brands by name

Popular brands

Sony Handycam HDR-AX2000E, Operating Manual

Search results

Summary of Contents for Handycam HDR-AX2000E

Reviews:

Related manuals for Handycam HDR-AX2000E

Brands by name

Popular brands