Sa
ving images with an e
xter
nal devic
e
US
Creating a disc with a
DVD writer, recorder
Creating a disc with the dedicated
DVD writer, DVDirect Express
You can create a disc or play back the
images on a created disc by using the
dedicated DVD writer, DVDirect Express
(sold separately).
Refer also to the instruction manual
supplied with the DVD writer.
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 15).
Only unused discs of the following types can
be used:
12cm DVD-R
12cm DVD+R
The device does not support two-layered discs.
DVDirect Express is referred to as “DVD
writer” in this section.
Connect the AC Adaptor and the
power cord (mains lead) to the
DC IN jack of your camcorder
and the wall outlet (wall socket)
(p. 15).
Turn on your camcorder, and
connect the DVD writer to the
(USB) jack of your camcorder with
the USB cable of the DVD writer.
Insert an unused disc into the
DVD writer, and close the disc
tray.
The [DISC BURN] screen appears on
the screen.
Press
(DISC BURN) on the DVD
writer.
Movies recorded on internal recording
media and not yet saved on any other
discs will be recorded to the disc
(DCR-SR20).
Movies not yet saved on any other discs
will be recorded to the disc (DCR-
SX20).
Repeat steps 3 and 4 when the
total memory size of movies to
be burnt exceeds that of the disc.
Select
[END]
[EJECT
DISC] on the screen.
Remove the disc after the operation is
completed.
