86
The
(OPTION) button is not
displayed.
• The OPTION MENU cannot be used
during Easy Handycam operation.
The menu settings have changed
automatically.
• During Easy Handycam operation, nearly
all the menu items will be automatically set
to the default settings.
• During Easy Handycam operation, some
menu items are fixed as follows.
– [REC MODE]: [HD SP] or [SD SP]
– [DATA CODE]: [DATE/TIME]
• The following menu items return to the
default settings when you set the POWER
switch to OFF (CHG) for more than 12
hours.
– [FLASH MODE]
– [FOCUS]
– [SPOT FOCUS]
– [EXPOSURE]
– [SPOT METER]
– [SCENE SELECTION]
– [WHITE BAL.]
– [COLOR SLOW SHTR]
– [SUPER NIGHTSHOT]
– [BLT-IN ZOOM MIC]
– [MICREF LEVEL]
– [DROP SENSOR]
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
• During Easy Handycam operation, settings
for the following menu items are
maintained the ones before Easy Handycam
operation.
– [MOVIE MEDIA SET]
– [PHOTO MEDIA SET]
– [AUDIO MODE]
– [WIDE SELECT]
– [X.V.COLOR]
– [SUB-T DATE]
– [FLASH MODE]
– [
INDEX SET]
– [CONVERSION LENS]
– [
IMAGE SIZE]
– [FILE NO.]
– [
DISPLAY]
– [VOLUME]
– [BEEP]
– [TV TYPE]
– [COMPONENT]
– [CLOCK SET]
– [AREA SET]
– [SUMMERTIME]
– [
LANGUAGE SET]
– [DEMO MODE]
– [CTRL FOR HDMI]
Your camcorder gets warm.
• This is because the power has been turned on for
a long time. This is not a malfunction.
The supplied Remote Commander
does not function.
• Set [REMOTE CTRL] to [ON] (p. 76).
• Insert a battery into the battery holder with
the +/– polarities correctly matching the +/–
marks (p. 111).
• Remove any obstructions between the
Remote Commander and the remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.
• Select a commander mode other than DVD
2 for your DVD device, or cover the sensor
of your DVD device with black paper.
The power abruptly turns off.
• Use the AC Adaptor.
• In the default setting, when approximately
5 minutes have elapsed while you do not
operate your camcorder, the camcorder is
automatically turned off (A.SHUT OFF).
Change the setting of [A.SHUT OFF]
(p. 76), or turn on the power again.
Batteries/Power sources
