Sony Handycam DCR-SR100E Operating Manual Download

Page: 19 / 103

You can play back recorded images (p.26,
29), or change the settings (p.46) using the
touch panel.
Touch the buttons displayed on the screen.

Support the rear of the LCD panel with
your finger. Then, touch the buttons
displayed on the screen.

• Perform the same actions as described above

when you press the buttons on the LCD frame.

• Be careful not to press the buttons on the LCD

frame accidentally while using the touch panel.

• If the buttons on the touch panel do not work

correctly, adjust the LCD screen
(CALIBRATION) (p.95).

To hide the screen indicators

Press DISP/BATT INFO to hide or show the
screen indicators (counter, etc.).

You can change the on-screen displays to
show messages in a specified language.
Select the screen language in [LANGUAGE]
on the

TIME/LANGU. (p.62).

Step 5: Using the touch panel

Touch the button on the LCD screen.

DISP/BATT INFO

Changing the language setting

Summary of Contents for Handycam DCR-SR100E








































































































Search results

Summary of Contents for Handycam DCR-SR100E

Reviews:

Related manuals for Handycam DCR-SR100E

Brands by name

Popular brands

Sony Handycam DCR-SR100E, Operating Manual

Search results

Summary of Contents for Handycam DCR-SR100E

Reviews:

Related manuals for Handycam DCR-SR100E

Brands by name

Popular brands