42
A
A/V connecting cable (supplied)
For DCR-HC45E:
The Handycam Station and your camcorder
are both equipped with A/V OUT jacks (page
70, 71). Connect the A/V connecting cable
either to the Handycam Station or to your
camcorder, depending on your setup.
B
A/V connecting cable with S
VIDEO (optional)
When connecting to another device via the S
VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable, pictures can be
reproduced more faithfully than with the
supplied A/V cable connection. Connect the
white and red plugs (left/right audio) and S
VIDEO plug (S VIDEO channel) of an A/V
connecting cable. In this case, the yellow
(standard video) plug connection is not
necessary. S VIDEO connection only will not
output audio.
C
i.LINK cable (optional)
Use an i.LINK cable to connect your
camcorder to another device equipped with an
i.LINK jack. The video and audio signals are
transmitted digitally, producing high quality
pictures and sound. Note that you cannot
output picture and sound separately.
b
Notes
• When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
• When you connect a device via an A/V
connecting cable, set [DISP OUT] to [LCD] (the
default setting) (p. 40).
A/V OUT
DV OUT
2
1
3
(Yellow)
(White)
(Red)
(Black)
(White)
(Red)
(Yellow)
Device without an
S VIDEO jack
Device with an
S VIDEO jack
A/V OUT jack
: Signal flow
To i.LINK jack
To
DV
OUT
Interface (i.LINK)
VCRs or DVD/HDD
recorders
DCR-HC45E:
Dubbing to VCR or DVD/HDD recorders (Continued)
