background image

65

Add

iti

on
al

 I

n

fo

rm
at

io

n

Maintenance and precautions

On use and care

• Do not use or store the camcorder and 

accessories in the following locations.
– Anywhere extremely hot or cold. Never leave 

them exposed to temperatures above 60 °C 
(140 °F), such as under direct sunlight, near 
heaters or in a car parked in the sun. They 
may malfunction or become deformed.

– Near strong magnetic fields or mechanical 

vibration. The camcorder may malfunction.

– Near strong radio waves or radiation. The 

camcorder may not be able to record properly.

– Near AM receivers and video equipment. 

Noise may occur.

– On a sandy beach or anywhere dusty. If sand 

or dust gets in your camcorder, it may 
malfunction. Sometimes this malfunction 
cannot be repaired.

– Near windows or outdoors, where the LCD 

screen, the viewfinder, or the lens may be 
exposed to direct sunlight. This damages the 
inside of the viewfinder or the LCD screen.

– Anywhere very humid.

• Operate your camcorder on DC 6.8 V/7.2 V 

(battery pack) or DC 8.4 V (AC Adaptor).

• For DC or AC operation, use the accessories 

recommended in these operating instructions.

• Do not let your camcorder get wet, for example, 

from rain or sea water. If your camcorder gets 
wet, it may malfunction. Sometimes this 
malfunction cannot be repaired.

• If any solid object or liquid gets inside the 

casing, unplug your camcorder and have it 
checked by a Sony dealer before operating it 
any further.

• Avoid rough handling, disassembling, 

modifying, physical shock, or impact such as 
hammering, dropping or stepping on the 
product. Be particularly careful of the lens.

• Keep the POWER switch setting to OFF(CHG) 

when you are not using your camcorder.

• Do not wrap your camcorder with a towel, for 

example, and operate it. Doing so might cause 
heat to build up inside.

• When disconnecting the mains lead, pull it by 

the plug and not the lead.

• Do not damage the mains lead such as by 

placing anything heavy on it.

• Keep metal contacts clean.
• If the battery electrolytic liquid has leaked,

– consult your local authorized Sony service 

facility.

– wash off any liquid that may have contacted 

your skin

– if any liquid gets in your eyes, wash with 

plenty of water and consult a doctor.

x

When not using your camcorder for a 

long time

• Periodically turn on the camcorder and play a 

cassette for about 3 minutes.

• Use up the battery pack completely before 

storing it.

Moisture condensation

If your camcorder is brought directly from a 
cold place to a warm place, moisture may 
condense inside your camcorder, on the 
surface of the tape, or on the lens. In this 
state, the tape may stick to the head drum 
and be damaged or your camcorder may not 
operate correctly. If there is moisture inside 
your camcorder, [

%

Z

 Moisture 

condensation. Eject the cassette] or [

%

 

Moisture condensation. Turn off for 1H.] 
appears. The indicator will not appear when 
the moisture condenses on the lens.

x

If moisture condensation has occurred

None of the functions except cassette 
ejection will work. Eject the cassette, turn 
off your camcorder, and leave it for about 
one hour with the cassette lid open. Your 
camcorder can be used again when both of 
the following conditions are met:

Continued 

,

Summary of Contents for Handycam DCR-HC27E













































































Reviews: