Sony Handycam DCR-HC21 Operating Manual Download Page 10

Page: 10 / 92

DCR-HC21 2-584-905-11(1)

Step 2: Charging the battery pack

You can charge the “InfoLITHIUM”
battery pack (P series) (p. 79) after
attaching it to your camcorder.

POWER switch

DC IN jack

DC plug

AC Adaptor

To the wall outlet

Attach the battery pack by sliding

it in the direction of the arrow
until it clicks.

Slide the POWER switch up to

OFF (CHG). (The default setting.)

Connect the AC Adaptor to the

DC IN jack on your camcorder.

DC IN jack

Connect the power cord to the AC

Adaptor and the wall outlet.

CHG (charge) lamp

The CHG (charge) lamp lights up and
charging starts.

The CHG (charge) lamp turns off

when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.

To remove the battery pack

Turn off the power, then press PUSH button
and remove the battery pack.

With the



mark

facing down

Summary of Contents for Handycam DCR-HC21





























































































Search results

Summary of Contents for Handycam DCR-HC21

Reviews:

Related manuals for Handycam DCR-HC21

Brands by name

Popular brands

Sony Handycam DCR-HC21, Operating Manual

Search results

Summary of Contents for Handycam DCR-HC21

Reviews:

Related manuals for Handycam DCR-HC21

Brands by name

Popular brands