24
Step 3: Turning the power on, and setting the date and time (Continued)
b
Notes
• If you do not use your camcorder for
about 3
months
, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 122).
• It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
• In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to save
battery power ([A.SHUT OFF], p. 85).
z
Tips
• The date and time does not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 82).
• See page 113 for information concerning
“World time difference.”
• If the buttons on the touch panel do not work
correctly, adjust the touch panel
([CALIBRATION], p. 120).
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME)
t
(SETTINGS)
t
[CLOCK/
LANG]
t
[
LANGUAGE SET], then select the
desired language.
Changing the language setting
Summary of Contents for Handycam DCR-DVD150E
Page 135: ......