Sony h.ear in 3 Truly Wireless WF-H800 Help Manual Download Page 86 | Manualshive

Page: 86 / 94

background image

Wireless Stereo Headset

h.ear in 3 Truly Wireless (WF-H800)

One-touch connection (NFC) does not work.

Remove the headset from the charging case and make sure that the headset is turned on.
Keep the smartphone close to the N-mark on the charging case until the smartphone responds. If it still does not
respond, slowly move the smartphone around in different directions.
Check that the NFC function of the smartphone is turned on.
If the smartphone is in a case, remove the case.
NFC reception sensitivity varies depending on the smartphone. If the connection repeatedly fails, connect/disconnect
by operating the smartphone.
You cannot establish a one-touch connection (NFC) while charging the battery, because the headset cannot be
turned on. Finish charging before establishing the one-touch connection (NFC).
Check that the connecting device supports the NFC function.
Check that the Bluetooth function of the smartphone is turned on.

Related Topic

One-touch connection (NFC) with an Android smartphone

5-007-451-11(1) Copyright 2019 Sony Corporation

86

«
...
84
85
86
87
88
...
»

Summary of Contents for h.ear in 3 Truly Wireless WF-H800































































































Reviews:

No comments

Related manuals for h.ear in 3 Truly Wireless WF-H800

Brand: Jabra Pages: 20

Brand: Launch Pages: 14

Kaliber Gaming NUKLEUS GHG601

Brand: IOGear Pages: 16

Brand: Meta Company Pages: 24

Brand: Iluv Pages: 2

Brand: Iluv Pages: 20

Move Style Edition

Brand: Jabra Pages: 13

Brand: Sony Pages: 1

Brand: Sony Pages: 2

Brand: Sony Pages: 3

Brand: Sony Pages: 2

Brand: Sony Pages: 8

Brand: Sony Pages: 17

Brand: Sony Pages: 21

Brand: Sony Pages: 32

BT10CX - DR - Headset

Brand: Sony Pages: 52

4-130-181-52(1)

Brand: Sony Pages: 56

Brand: Sony Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands