Personal Audio System
h.ear go (SRS-HG1)
Using the BLUETOOTH/Network standby mode
If the BLUETOOTH/Network standby mode is on, the speaker turns on when a BLUETOOTH device or network device is
operated. The BLUETOOTH or network connection then starts.
When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the speaker
will become operational sooner, than when you turn on the speaker in the standby mode.
The BLUETOOTH/Network standby mode can be set only when the speaker is connected to an AC outlet via the USB AC adaptor
(supplied).
To turn off the BLUETOOTH/Network standby mode
With the speaker turned on, press and hold the (power)/
PAIRING button and the FUNCTION button simultaneously. When
the indicator lights up in red, the BLUETOOTH/Network standby mode is turned off and the speaker enters the standby mode.
Note
Connect the speaker to the AC outlet via the USB AC adaptor, then turn the speaker on.
The (power) indicator lights up in green.
1
Press and hold the (power)/ PAIRING button and the FUNCTION button simultaneously until the
(power) indicator lights up in orange.
The speaker turns off and enters the BLUETOOTH/Network standby mode.
If you operate a BLUETOOTH device or network device to connect to the speaker, the speaker turns on automatically and
connection starts.
2
36
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...