Sony h.ear go 2, Help Manual

Page: 171 / 230

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Update method 1: Automatic update via the Internet
When you use the speaker while connected to the Internet via a Wi-Fi network, the speaker can update to the latest
software version automatically.
This feature is disabled by default.
Preparation for update
Software updates become possible when the speaker is in the following states.
To update software automatically
Launch “Sony | Music Center” on your smartphone, iPhone, etc., and set on [System] in the [Settings] menu.
The automatic software update feature ([Auto Update]) of the speaker is activated. If [Auto Update] is disabled,
change the setting to enable.
The update is performed when you are not using the speaker, such as during midnight or when the speaker is in
BLUETOOTH/Network standby mode. During an update, the UPDATE indicator flashes in orange, and turns off when
the update is complete. When the speaker is turned on for the first time after updating, the UPDATE indicator flashes
in orange three times.
To deactivate the software automatic update
Disable [Auto Update] in the [Settings] menu by using “Sony | Music Center” installed on a smartphone, iPhone, etc.
However, the software may still be updated automatically for critical changes, even if you disable this function.
If the indicator and the button flash as explained in the following
The (power) indicator flashes in red and the UPDATE indicator flashes in orange.
The software update has failed.
Turn off the speaker, then turn it on again. The update will resume. If the situation is not improved after switching the
speaker off and on, consult your nearest Sony dealer.
Hint
The number of flashes of the UPDATE indicator indicates the update’s progress. The UPDATE indicator flashes four times at first,
and decreases by one flash, then turns off when the updating is completed. Do not turn the speaker off during the update.
When the speaker is connected to the Internet via a Wi-Fi network, the UPDATE indicator on the speaker lights up in orange
when the speaker detects a new software version.
Regardless of the [Auto Update] setting, the UPDATE indicator lights up in orange when the speaker detects a new software
version.
You can update the software manually even when the [Auto Update] setting is activated. See " Update method 2: Manual update
via the Internet ."
Note
Updating normally takes about 3 to 10 minutes. It may take longer depending on your network environment.
Do not operate the speaker during an update. Keep the speaker connected to an AC outlet via the USB AC adaptor and network
while updating. An update cannot be performed when the speaker is powered by the built-in battery only.
The speaker is connected to the AC outlet with the supplied USB AC adapter.
(Software updates cannot be performed when using with the built-in rechargeable battery.)
1.
The speaker is connected to the Internet via a Wi-Fi network.
2.
171