manualshive.com logo in svg

Sony GTK-X1BT, Operating Instructions Manual, Page: 17 / 32

Share
Download
Sony GTK-X1BT Operating Instructions Manual Download Page 17

17

GB

Blue

too
th

• If you want to pair with another 

Bluetooth

 

device, repeat steps 1 to 6.

To cancel the pairing operation

Hold down BLUETOOTH on the unit for 
2 seconds or more until “BT AUDIO” 
appears in the display panel.

You can operate a 

Bluetooth

 device by 

connecting the system and a 

Bluetooth

 

device using AVRCP.
Check the following before playing 
music:
– The 

Bluetooth

 function of the 

Bluetooth

 

device is turned on.

– Pairing has been completed.

1

Press BLUETOOTH on the unit 
to select 

Bluetooth

 function.

“BT AUDIO” appears in the display 
panel.

2

Establish connection with the 

Bluetooth

 device.

The last connected 

Bluetooth

 device 

will be connected automatically.
Perform the 

Bluetooth

 connection 

from the 

Bluetooth

 device if the device 

is not connected.
Once the connection is established, the 

Bluetooth

 device name appears in the 

display panel.

3

Press 

N

 to start playback.

Depending on the 

Bluetooth

 device,

– you may need to press 

N

 twice.

– you may need to start playing an 

audio source on the 

Bluetooth

 

device.

Notes

• When the system is not connected to any 

Bluetooth

 device, the system will connect to 

the last connected 

Bluetooth

 device 

automatically when you press 

N

.

• If you try to connect another 

Bluetooth

 device 

to the system, the current connected 

Bluetooth

 

device will be disconnected.

To disconnect the 

Bluetooth

 device

Press BLUETOOTH on the unit. 
“BT AUDIO” appears in the display 
panel.
Depending on the 

Bluetooth

 device, the 

Bluetooth

 connection may be canceled 

automatically when you stop playback.

Use the buttons on the unit to perform this 
operation.

1

Press BLUETOOTH to select 

Bluetooth

 function.

“BT AUDIO” appears in the display 
panel.
If the system is connected to a 

Bluetooth

 device, the 

Bluetooth

 device 

name appears in the display panel.
Press BLUETOOTH to disconnect the 

Bluetooth

 device.

2

While holding down 

x

, press 

LED SPEAKER for about 
3 seconds.

“BT HIST” and “CLEAR” appear in 
the display panel and all the pairing 
information is erased.

Playing music from a 

Bluetooth

 device

Erasing all the pairing 
registration information

Summary of Contents for GTK-X1BT

































Reviews:

No comments