Sony GTK-X1BT, Operating Instructions Manual, Page: 12 / 32

12 GB
Changing the display
mode
The demonstration appears in the display
panel once you plug the power cord into a
wall socket.
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
work internally.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Playing a USB device
The audio formats that can be played back
by this system are as follows:
– MP3: file extension “.mp3”
– WMA: file extension “.wma”
– AAC: file extension “.m4a”, “.mp4” or
“.3gp”
– WAV: file extension “.wav”
If the audio files have the above file
extension but are not the respective
formats, the system may produce noise or
may malfunction.
Check the information on the website
about compatible USB devices (page 25).
1
Connect a USB device to the
port.
Notes
• You can use your iPhone/iPod with this
system via Bluetooth connection only.
• You can use a USB adaptor (not supplied)
to connect the USB device to the unit if the
USB device cannot be plugged into the
port.
2
Press FU/– repeatedly
to select USB function.
3
Press N to start playback.
To change the play mode
Press PLAY MODE repeatedly.
• Normal Play (blank): play all audio files
on a USB device
• Folder Play (“FLDR”)
1)
: play all audio
files in the specified folder on a USB
device
• Shuffle Play (“SHUF”)
2)3)
: shuffle all
audio files on a USB device
1)
You cannot select Folder Play and “ ” at
the same time.
2)
You cannot select Shuffle Play and Repeat
Play at the same time.
3)
When you turn off the system, the selected
Shuffle Play is cleared and the play mode
returns to Normal Play.
USB Playback