manualshive.com logo in svg

Sony GMT-GP7, Operating Instructions Manual

Share
Download
Sony GMT-GP7 Operating Instructions Manual Download Page 26

26

GB

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette. 

Cover the broken tab with adhesive tape 
(page 28).

• The tape has wound to the end.

Optional components

There is no sound.

• Refer to General item “There is no sound.” 

(page 24) and check the condition of the system.

• Connect the component properly (page 22) while 

checking:

– if the cords are connected properly.

– if the cord plugs are firmly inserted all the way.

• Turn on the connected component.

• Refer to the operating instructions supplied with 

the connected component and start playing.

• Press FUNCTION on the remote repeatedly (or 

MD (VIDEO) on the uint) until “MD” or 
“VIDEO” appears (page 22).

The sound is distorted.

• Set the volume of the connected component 

lower.

If the system still does not 
operate properly after performing 
the above measures, reset the 
system as follows:

Use buttons on the unit for the operation.

1

Disconnect the power cord.

2

Reconnect the power cord.

3

Press 

?/1

 to turn on the system.

4

Press 

x

, PLAY MODE/TUNING MODE and 

?/1

 at the same time.

The system is reset to the factory settings. You 
should set the settings you made, such as the 
preset stations, clock, and timer.

One of the following messages may appear or 
flash in the display during operation.

CD/MP3

NO DISC

There is no disc in the player.

NO STEP

All of the programed tracks have been erased.

OVER

You have reached the end of the disc while pressing 
and holding 

M

 during playback or pause.

STEP FULL

You tried to program 26 or more tracks (steps).

PUSH STOP

You pressed PLAY MODE/TUNING MODE on 
the unit during playback.

Tuner

COMPLETE

The preset operation ended normally.

Tape

NO TAB

You cannot record the tape because the tab has been 
removed from the cassette.

NO TAPE

There is no tape in the tape deck.

Timer

OVERLAP

The Daily Timer setting or the Timer Recording 
setting overlaps with part or all of another timer 
setting.

SET NG

You cannot select the timer function when the Daily 
Timer or Timer Recording are not set.

TIME NG

The Daily Timer or Timer Recording start and end 
times are set to the same time.

Messages

Summary of Contents for GMT-GP7

































Reviews:

No comments

Brands by name

Popular brands

Load more brands