Sony Giga Juke NAS-SC55PKE, Quick Connection And Setup Manual, Page: 4 / 20

NAS-SC55PKE.GB.3-300-262- 13 (1)
GB
Connecting the speakers and antennas of the
“GIGA JUKE” Music Server
1 1 2
3 6 4 5
UK model
This operation is performed on the “GIGA JUKE” Music Server.
Note
DO NOT plug the power cord into a wall outlet until instructed to do so.
Follow the steps below to connect the supplied speakers and antennas to the “GIGA JUKE” Music
Server.
1
Connect the speaker cords to the speakers.
Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted into the
speaker terminals.
Insert the end of the cord marked with a red line into the + terminal and the cord with no marking
into the – terminal.
Red line