Sony Giga Juke NAS-SC500PK, Operating Instructions Manual, Page: 77 / 203

NAS-SC500PK.GB.4-114-863- 11 (1)
GB
“GIGA JUKE”
M
usic S
er
ver
3
Press and hold down /–.
Scanning stops automatically when a station
is tuned in. To cancel scanning, press

(Auto
tuning).
To select the station manually, press TUNING
+/– repeatedly until the frequency of the
desired radio station appears (Manual
tuning).
*
1
If the station provides RDS (Radio Data System)
service, information provided by RDS will be
displayed (on European models only).
Station name*
1 Frequency
Preset number Tuning mode
Tips

If you experience noise in an FM stereo broadcast,
enter the Options menu and select [Setting] – [FM
mode] – [Monaural]. The reception will no longer be
stereo, but it will be clearer. To change back to stereo
reception, do the same procedure and select [Auto
stereo].

For better broadcast reception, try changing the
direction or location of the antenna. For example,
position the antenna near or outside a window. If the
reception does not improve, it is recommended to
connect a commercially available external antenna.
Receiving a DAB service*
Before you can receive DAB services, the broadcast
components (service components) must first be
registered by conducting a DAB Initial Scan (see
“Performing DAB Initial Scan” on page 76).
Press DAB, or enter the HOME menu and
select [DAB].
The DAB main display appears and the unit starts
receiving the services.
About the DAB main display
Name of service
Service Label and frequency
DLS (Dynamic Label Segment)
Ensemble Label
About DAB service component list
Service number
* For the UK model only