Sony Giga Juke NAS-SC500PK, Operating Instructions Manual, Page: 19 / 203

NAS-SC500PK.GB.4-114-863- 12 (1)
19
GB
Rear of the main unit
For details on connections of the speaker cords and
antennas, refer to the supplied leaflet “Setup Guide”.
The illustration uses the models except the UK model.

USB port
Use to connect a USB storage device, another
portable device, or the supplied wireless
adaptor with the wireless adaptor extension
cable (pages 42, 58, 100, 126).

NETWORK port
Use to connect the unit to a network (pages
98, 130).

MONITOR OUT (NTSC) jack
Use to connect a TV.
 DMPORT
Use to connect the DIGITAL MEDIA PORT
adapter to listen to the playback of a digital
music player (page 81).

AUDIO IN jack
Use to connect the external audio component
(page 82).
How to detach the speaker cords
from the speaker connectors
If you want to use a different set of speaker cords,
you can remove the cords from the speaker
connectors.
Tips

You can use any commercially available speaker cords of
gauge AWG #18 - AWG #24.

Before attaching a new speaker cord, strip off 10 mm of
its insulation and twist the bare wires.
Push the tab on the speaker connector in the direction
of the arrow and pull out the speaker cord.