NAS-SC500PK.GB.4-114-863-
11
(1)
10
GB
To enter PARTY MODE while [Auto join PARTY
MODE] is set to [Off], press the PARTY button. If
the “Host” is playing a track at the time, the unit
will not start playing from the middle of the track.
The unit will start playing when the “Host” starts
playing the next track.
To change a server
When you want to change to a different server, do
the following procedure.
1
Press HOME NETWORK.
2
Press
to display the window
shown below*
1
.
*
1
Items are displayed in the language that is set on
the “GIGA JUKE” Music Server.
3
Press
/
to select [Select server].
A server disconnection confirmation window
appears.
4
Press
/
to select [OK].
The unit is disconnected from the server and a
list of servers appears.
The icon next to the server name indicates the
server type.
Icon
Server type
No icon
This is a server you have
connected to before and which is
presently operating.
This is a server you have
connected to before, but which
is presently not operating or not
recognizable.
This is a server you have never
connected to before.
5
Press
/
to select the server.
To update the server list
Select [Update info] while the server list is displayed.
The unit searches for new servers and an updated server
list appears.
Tip
The unit keeps a history of the last ten connected servers.
This history can also be deleted (below).
To edit the server list
You can delete non-operating or unrecognizable servers
from the list.
1
While the HOME NETWORK function is active,
press SETTINGS on the unit.
The Settings menu appears.
2
Select [Server setting] – [Server delete].
A list of deletable servers appear.
If there are no deletable servers, “There is no
server to delete.” appears in the display.
3
Select the server you want to delete.
Each time you press ENTER, the check box is
checked or unchecked.
4
Select [OK].
All checked servers are deleted.
Note
Servers that are presently operating do not appear on the
deletable server list and cannot be deleted.
To manually select a server each time
When the HOME NETWORK function is activated on
the unit, it is factory set to automatically connect to the
last connected server.
You can change the setting to manually select the server
instead.
1
Press SETTINGS.
The Settings menu appears.
2
Select [Server setting] – [Server auto connect].
3
Select [Off].
Summary of Contents for Giga Juke NAS-SC500PK
