NAS-E300HD.GB.4-115-698-
11
(1)
3
GB
You can tune in FM/AM radio stations or DAB
services either manually or automatically. Pre-
setting stations or services in advance allows you
to recall them up by number.
DAB services can be received with the UK model
only.
TUNER/BAND
ENTER
FM MODE
TUNE +/–
TUNING MODE
TUNER
MEMORY
Selecting an FM/AM radio
station or a DAB service*
Before you can receive DAB services, the broadcast
components (service components) must first be
registered by conducting a DAB Automatic Scan
(see “To run the DAB Automatic Scan” on page
20).*
* For the UK model only
1
Press TUNER/BAND repeatedly to
select “DAB”, “FM”, or “AM”.
2
Press TUNING MODE repeatedly until
“AUTO” appears in the display.
3
Press TUNE +/– to tune in the desired
station or service.
Scanning stops automatically when a station
is turned in, and then “TUNED” and
“STEREO” (for stereo program only) appear
in the display. To cancel scanning, press
.
Frequency (for FM/AM) or service label (for DAB)
FM mode
Function
When you tune in an FM station that
provides RDS (Radio Data System) services,
the station name appears in the display (on
European models only).
Tip
You can select the tuning mode with the Options menu as
well. Enter the Options menu and select “Tuning Mode”
– “Manual” or “Auto” (for DAB reception, “Manual” does
not appear).
To tune in a station with a weak
signal (FM or AM reception only)
If “TUNED” does not appear and scanning does
not stop, press TUNING MODE repeatedly until
“AUTO” or “PRESET” disappears, and then press
TUNE +/– repeatedly to tune in the desired
station.
Listening to the radio or DAB services
