Status
Draft
Assembly
Your device only supports nano SIM cards. The nano SIM cards and the memory
card have separate slots in the same device. Make sure you don’t confuse the two.
To prevent data loss, make sure you turn off your device before you drag out the holder to
remove the nano SIM card (or cards) or memory card from the device.
GUID
GUID-A00623F6-271A-44C6-BACC-F441DAA2AB8C
Title
Assembly
Changes
For Hinoki editorial comments
Version
11.1.1
Author
ZoltanS
Status
Draft
To insert nano SIM card and memory card
ID: ILL-SONY-17PE-INSERT-SIM-AND-MEM-CARD
Do not cut your SIM card, for example using a blade or scissors, as this may damage your
device.
1
Using your fingernail, drag out the SIM card tray.
2
Firmly place the SIM card in the correct orientation in position (1) as shown in
the illustration.
3
Firmly place the memory card in the correct orientation in position (2) as shown
in the illustration.
4
Gently push the tray back into the slot until it fits into place.
GUID
GUID-726B6440-6CFD-442B-A81C-FF68176080D5
Title
To insert the SIM and memory card - SG
Changes
For Hinoki added editorial comments
Version
1.1.6.1.1
Author
ZoltanS
Status
Draft
To remove the nano SIM card
1
With the screen facing down, open the nano SIM card tray.
2
Drag out the nano SIM card tray using your fingernail.
3
Remove the nano SIM card, then gently push the tray back into the slot until it
fits into place.
GUID
GUID-941B1332-EBE8-4A1C-80F9-4D29EF0F71DD
Title
To remove the SIM card - General use
Changes
For Hinoki removed 'memory card tray'
Version
9.2.2.1.1
Author
ZoltanS
8
This is an internet version of this publication. © Print only for private use.