34
The SET SETTING Menu
The SET SETTING
Menu
The SET SETTING menu is used for
changing the settings of the projector.
Smart APA
Activates or deactivates the Smart APA
1)
.
On:
Normally select this setting. When a
signal is input from a computer, the APA
functions automatically so that the
picture can be seen clearly. Once the
specified analog input signal has been
adjusted by the Smart APA, it will not be
readjusted even when the cable is
disconnected and connected again or the
input channel is changed. You can adjust
the picture by pressing APA key on the
Remote Commander even if the Smart
APA set to “On.”
Off:
The APA functions when you press the
APA key on the Remote Commander.
1) The APA (Auto Pixel Alignment)
automatically adjusts “Dot Phase,” “H Size”
and “Shift” in the INPUT SETTING menu
for the input signal from a computer.
Auto Input Search
Normally set to “Off.”
When set to “On,” the projector detects input
signals in the following sequence: Input-A/
Input-B/Input-C/Video/S-Video. It indicates
the input channel when the power is turned
on or the INPUT key is pressed.
Input-C Signal Sel.
Selects either a computer signal, a
component signal or a video GBR signal
(15k RGB, DTV, HDTV) for the signal that
is input to the INPUT C connector.
Color System
Selects the color system of the input signal.
If you select “Auto,” the projector detects
the color system of the input signal
automatically. If the picture is distorted or
colorless, select the color system according
to the input signal.
Power Saving
When set to “On,” the projector goes into
power saving mode if you do not operate the
unit for 10 minutes with no signal input.
IR Receiver
Selects the remote control detectors (IR
receiver) on the front and rear of the
projector.
Front&Rear:
Activates both the front and
rear detectors.
Front:
Activates the front detector only.
Rear:
Activates the rear detector only.
Menu Items
Input A
S m a r t A PA :
Au t o I n p u t S e a rc h :
I n p u t - C S i g n a l S e l :
C o l o r S y s t e m :
Pow e r S av i n g :
I R R e c e i v e r :
O n
O f f
C o m p u t e r
Au t o
O f f
F ro n t & R e a r
SET SETTING
