FST-ZUX999.GB.4-148-130-11(1)
GB
Setting the clock
Make sure to turn off the DJ mode and
use buttons on the remote to set the
clock.
1
Turn on the system.
Press
/
.
2
Select the clock set mode.
Press CLOCK/TIMER SET.
If “PLAY SET?” flashes, press
/
repeatedly to select
“CLOCK SET?,” and then press
ENTER.
3
Set the time.
Press
/
repeatedly to set the
hour, and then press ENTER.
4
Use the same procedure to set
the minutes.
Note
The clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is off
Press DISPLAY A or B (or DISPLAY
on the remote) repeatedly. The clock is
displayed for about 8 seconds.
To display the clock when in DJ-off
mode
Press DISPLAY B (or DISPLAY on the
remote) repeatedly.