24
1
Open the cover in the direction of
the arrow.
2
Insert the memory card with the
notched edge in the direction as
illustrated until it clicks.
b
Notes
• If you insert a memory card into the slot in
the wrong direction, the memory card, the
memory card slot, or image data may be
damaged.
To eject the memory card
Lightly push the memory card once.
b
Notes
• When the access lamp is lit or flashing in red,
your camcorder is reading/writing data. Do not
shake or knock your camcorder, turn the power
off, eject the memory card, or remove the
battery pack. Otherwise, image data may be
damaged.
• If [The image database file is corrupted. The
media must be restored to use again.] appears in
step
2
, format the memory card (p. 63).
• When inserting or ejecting the memory card, be
careful to prevent the memory card from
popping out and dropping.
You can attach a flash memory unit HXR-
FMU128 (sold separately) to your
camcorder for recording movies.
While sliding the RELEASE lever,
align the mark on the camcorder
with the one on the flash memory
unit, and slide the flash memory unit
in the direction of the arrow.
To remove the flash memory unit
Turn off your camcorder, and while sliding
the RELEASE lever in the direction of
arrow, remove the flash memory unit.
Memory card slot
Note the direction of notched
corner.
Access lamp
Flash memory unit
Align the marks.
Step 6: Inserting a memory card/Attaching a flash memory unit
(Continued)
