1. Turn on the Handycam.
For details, refer to “Connecting this product to one camera with Multi Camera Control
(Single Connection)” in the Help Guide of the Handycam.
Example: Help Guide of FDR-AX30/AXP35
http://rd1.sony.net/help/cam/1510/h_zz/
2. Set the connection mode of the camera.
Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi] - [ON],
then press the ENTER button.
3. Select the SSID that is printed on the sticker attached to Start Guide.
4. When this camera beeps and [ACPT?] is displayed on the display panel of this camera,
press the ENTER button of this camera.
Note
When [BEEP] is set to [OFF], the connection beep does not sound.
[75] How to use
Using the camera connected to other devices via Wi-Fi
Connecting to
Handycam
Connecting multiple cameras to Handycam (Multi
connection)
You can operate this camera using a Handycam that supports the multi camera control
function.
1. Turn on the Handycam.
For details, refer to “Connecting this product to more than one camera with Multi
Camera Control (Multi Connection)” in the Help Guide of the Handycam.
Example: Help Guide of FDR-AX30/AXP35
http://rd1.sony.net/help/cam/1510/h_zz/
2. Set the connection mode of the camera.
When you connect the camera to Handycam for the first time
Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi] -
[MULTI] - [NEW], then press the ENTER button.
When this camera beeps and [AWAIT] is displayed on the display panel of this
camera, register this camera using the Handycam.
[DONE] appears on the display panel of this camera when connecting finishes.
