Wind noise reduction
This function automatically cuts low-range wind noise according to the noise level when
recording using the built-in microphone.
1. Press the NEXT button or PREV button to select [SETUP] - [WIND], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
ON:
Cuts low-range to reduce wind noise.
OFF:
Does not reduce wind noise.
BACK:
Returns to the [WIND] menu.
Note
This function does not activate while an external microphone is connected to this product.
[36] How to use
Changing the Settings
Shooting settings
Loop recording time
Set the time range (media area) for loop recording.
1. Press the NEXT button or PREV button to select [SETUP] - [L.OPT], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
