Sony FDR-AX700, Service Manual, Page: 79 / 144

4-2-20. Lens Chassis, Lens Frame (R)
[ 2 ] screw
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
[ 6 ] four screws
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
[ 7 ] two screws
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
[ 5 ] three screws
#12 (M1.7 X 5.0)
(0.12 ± 0.02 N·m)
[ 8 ] Lens frame (R)
[ 8 ] Lens chassis
[ 3 ] Heat sink (T)
Refer to "Notes on Assembling the
Heat Sink (T)".
[ 4 ] Tape AS
(Note 1)
(Size 25 x 25 mm)
Refer to "Notes on
Assembling the Tape AS".
[ 1 ] CM radiation sheet (915)
(Note 2)
Refer to "Notes on Assembling the CM Radiation Sheet (915)".
Note 1: Use this to cut or splice so that it becomes the designated size.
Note 2: Do not reuse the CM Radiation Sheet (915) because its adhesive
force decreases when it is removed once.
FDR-AX700
4-27
Sony CONFIDENTIAL
For Authorized Servicer
SYS SET
2019/01/18 06:14:17 (GMT+09:00)