Using Your New TV
5
Using Y
our New TV
Sony KV-XJ29 Group N30 Dummy_4-091-294-E4 (1)
Front of TV
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 or 2 jacks
at the rear of your TV or the VIDEO 2 INPUT jacks at the front of your TV.
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• Do not connect video equipment to the VIDEO 2 INPUT jacks at the front
and VIDEO IN 2 (video input) jacks at the rear of your TV at the same
time; otherwise the picture will not be displayed properly on the screen.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
• The AUTO PROGRAM button on the remote works as the AUTO
PROGR button on the TV.
AUTO
PROGR
1
1
2
3
1
2
3
CABLE: ON
AUTO PROGRAM
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
PIC MODE
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
Insert the batteries
into the remote
01GB03GET-TWN.p65
18/03/04, 09:33
5
Black
