Sony FD TRINITRON WEGA KV-21FS120, Operating Instructions Manual

Page: 38 / 48

30
Me
n
u
s
KV-21FS120/KV-25FS120
2-886-337- 21(1)
Using the Timer Menu
Current Time
Set your TV to the current day and time.
Press
b
to open Current Time menu:
1 Use the
V
or
v
button to enter the day and time, then press .
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use your timers settings to program your TV by day, time, duration and
channel. The timer’s duration is maximum of 6 hours. When the channel
is fixed, it is not necessary to set the channel.
With the menu open, set cursor on Timer 1 or Timer 2:
1 Press
V
or
v
to select Timer 1 or Timer 2, then press .
2 Press
V
or
v
to enter the desired day, time, duration and channel, then
press . The Timer status should be On when the Timer has been set.
3 Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any
loss of power, Current Time and Timer 1 and Timer 2 settings will be cleared.
To access the Timer menu, refer to the following steps:
Press
v
to highlight an option, then press .
To Display
To Highlight
To Select
Timer 1 : Set
Timer 2 : Set
Current Time
Timer
End Move Select
✍
You must set the Current Time before you can use Timer 1 and Timer 2.
✍
You can set the Timer to On, Off, or Set. Once the timer is set, you can turn it On or Off without having to
go through the settings. When you set Timer 1 or Timer 2, a red light on the front panel of your TV will
turn on.