masterpage:Left
filename[D:\WORKS\Mavica\2nd\3066742111MVCFD92UC\02GB-
MVCFD92UC\04bas.fm]
22
model name1[MVC-FD92]
[3-066-742-11(1)]
When you use the self-timer function, the subject is recorded 10 seconds after you
press the shutter button.
Select
on the LCD screen with
b
/
B
/
v
/
V
on the control button, then press the
center
z
. The
(self-timer) indicator appears on the LCD screen, and the subject is
recorded 10 seconds after you press the shutter button. The self-timer lamp flashes
after you press the shutter button until the image is recorded.
The initial setting is AUTO (no indication). In this mode, the flash automatically
strobes when the surroundings become dark. To change the flash mode, press
(Flash) repeatedly so that the flash mode indicator appears on the LCD screen.
Each time you press the button, the indicator changes as follows.
(No indication)
t
t
t
t
(No indication)
Auto red-eye reduction : The flash strobes before recording to reduce the red-
eye phenomenon.
Forced flash : The flash strobes regardless of the surrounding brightness.
No flash : The flash does not strobe.
You can change the amount of the flash light with [FLASH LEVEL] in the menu
settings (page 44).
Notes
•
The recommended shooting distance is 0.3 to 2.5 m (1 to 8 1/3 feet).
•
Attaching a conversion lens (not supplied) may block the light from the flash and the recorded
image may be eclipsed.
•
You cannot use the built-in flash and an external strobe at the same time.
•
Auto red-eye reduction may not produce the desired red-eye reduction effects depending
on individual differences, the distance to the subject, if the subject does not see the pre-strobe,
or other conditions.
•
The flash effect is not obtained easily when you use forced flash in a bright location.
Using the self-timer
Recording images with the flash
Control button
Self-timer lamp
Shutter button
(Flash)
01cov.book Page 22 Monday, December 18, 2000 3:34 PM
