manualshive.com logo in svg

Sony ExwaveHAD DXC-990P, Instructions For Use Manual

Share
Download
Sony ExwaveHAD DXC-990P Instructions For Use Manual Download Page 32

32

Connections

Connections

To supply power to the camera, use the 
CMA-D2CE

*

/D2MDCE/D3CE

*

 camera 

adaptor (not supplied).

Be sure to turn off the power supply for all 
equipment before making any connection.

* CMA-D2CE/D3CE are intended for general purpose 

use. They are not intended for medical use.

Using the CMA-D2CE

*

/D2MDCE 

camera adaptor

There are two methods for connecting the 
camera and the camera adaptor.

Using the CCDC cable

This connection only supplies power to the 
camera.

For connecting method, see “Connecting 
using the CCDC cable (for supplying power 
only)” on page 33.

Using the CCXC cable

This connection supplies power to the 
camera and transmits video signals to the 
camera adaptor.

For connecting method, see “Connecting 
using the CCXC cable (for supplying power 
to camera and video signals to the camera 
adapter)” on page 33.

Be sure to use one camera adaptor for each 
DXC-990P unit.
Although the CMA-D2CE

*

/D2MDCE 

camera adaptor has two CAMERA 
connectors (4-pin and 12-pin), the power 
consumption of the camera is such that two 
camera units cannot be connected at the 
same time.

* CMA-D2CE is intended for general purpose use. It is 

not intended for medical use.

Using the CMA-D3CE* camera 
adaptor

The connections using the CMA-D3CE

*

 

camera adaptor supply power to the camera 
and transmit video signals to the camera 
adaptor. 

For connecting method, see “Connecting to 
the CMA-D3CE* Camera Adaptor” on page 
36.

* CMA-D3CE is intended for general purpose use. It is 

not intended for medical use.

Note

Note

Summary of Contents for ExwaveHAD DXC-990P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands