45
Message List
A
ppe
nd
ix
B
Appendix
Message List
The following messages and indications may appear for this camera. Perform the following as
necessary.
Lamp display
Screen display
Lamp
Meaning and solution
The STANDBY lamp and
POWER lamp are lit.
Set BOTTOM switch (5) to ON.
Message
Meaning and solution
PRESET n:OK
(“n” is a preset position
number between 1 and 6)
This message appears for about 3 seconds when you store camera
settings to POSITION 1 to 6.
RESET n:OK
(“n” is a reset position
number between 1 and 6)
This message appears for about 3 seconds when you reset camera
settings stored in POSITION 1 to 6.
ONE PUSH WB:OP
During the white balance adjustment in the ONE PUSH white
balance mode, this message blinks on the screen.
ONE PUSH WB:OK
When the white balance adjustment has been done correctly in the
ONE PUSH white balance mode, this message is lit on the screen.
ONE PUSH WB:NG
When the white balance adjustment has failed in the ONE PUSH
white balance mode, this message blinks on the screen.
