EVI-D100/D100P
3-206-217-
08(1)
Basic Oper
ations
Pan/Tilt Operation
43
Pan/Tilt Operation
PO
WER
CAMERA SELECT
1
2
3
AU
TO
POSITION
HOME
RM-EV100
PRESET
STD
REV
BA
CK LIGHT
MANU
AL
FA
R
FOCUS NEAR
W
T
W
T
3
4
5
6
PAN-TIL
T
SLO
W
FAST
ZOOM
L/R
DIRECTION SET
PAN-TIL
T
RESET
DA
TA SCREEN
1
2
STD
REV
HOME
PAN-TILT
RESET
L/R DIRECTION
SET
CAMERA SELECT
RESET
2
1
Press the POWER switch.
1
The camera will turn on,
performing the pan/tilt reset action
automatically.
Press the arrow button to change the
2
directions of the camera head.
While checking the picture on the
screen, press the desired arrow
button.
To move the camera little by
little
, press the button just for
amoment.
To move the camera in a wide
range
, press and hold down
thebutton.
To move the camera diagonally,
press the arrow button ( or )
while holding down the arrow
button (
or
)
To face the camera back to the
front
Press the HOME button.
If you accidentally move the
camera head with your hand
Release the camera head immediately to let
it return to the previous position
automatically. If you move the camera head
and hold it over a prolonged period, the
camera’s power turns off.
To turn it back on, press the POWER switch
on the Remote Commander.
When the camera is facing in the
wrong direction
The camera is preset to face toward the right
whenever the arrow ( ) button is pressed.
You might wish to face the camera toward
the opposite direction from that of the
button you pressed. In such a case, you can
change the direction of the camera while
checking the picture on the screen. To do so,
press the REV button while holding down
the L/R DIRECTION SET button.
To reset that setting, press the STD button
while holding down the L/R DIRECTION
SET button.
Arrow
button
Movement of the
camera
Setting
L/R
DIRECTION SET
While holding down
STD
1
Press
L/R
DIRECTION SET
While holding down
Press
REV
2
Summary of Contents for EVI-D100 (NTSC)
Page 54: ...54 Specifications ...
Page 55: ...General Specifications 55 ...
