16
GB
2
Secure the wall anchor bracket to a wall
or pillar.
3
Thread the rope or chain through both
holes of the screws, and then tighten the
other end of the rope or chain to the wall
anchor bracket.
4: Connecting the FM
wire antenna (aerial)
Connect the supplied FM wire antenna (aerial) for
listening to the FM radio. Thread the wire antenna
(aerial) through the slit of the cover, and then replace
the cover.
Notes
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as
horizontal as possible.
Tip
If you have poor FM reception, use an “L” type 75-ohms
coaxial cable (not supplied) to connect the system to an
outdoor FM antenna (aerial) as shown below. If you use a
75-ohms coaxial cable other than “L” type, you may not be
able to replace the covers properly.
A commercially available
strong rope or chain
A commercially
available wall
screw
DVD
DIGITAL OUT
FM ANTENNA
OPTICAL
FM 75
COAXIAL
FM wire antenna (aerial)
DVD
DIGITAL OUT
FM ANTENNA
OPTICAL
FM 75
COAXIAL
Outdoor FM antenna
(aerial)
“L” type 75-ohms coaxial
cable (not supplied)