Sony ERS-1000, Help Manual

Page: 67 / 115

Help Guide
ENTERTAINMENT ROBOT
ERS-1000
Using the Wi-Fi Protected Setup™ (WPS) button for Wi-Fi network connection
If your Wi-Fi router/access point supports the Wi-Fi Protected Setup™ (WPS) standard, follow these steps to connect
your aibo to your Wi-Fi network.
Before you do the following, make sure:
You can access the Internet through your Wi-Fi network.
Your Wi-Fi router/access point is equipped with the Wi-Fi Protected Setup™ (WPS) button.
The location and shape of the Wi-Fi Protected Setup™ (WPS) button depends on the Wi-Fi router/access point.
Refer to the document supplied with your Wi-Fi router/access point for the instructions on using the button.
4-724-607-21(2) Copyright 2018 Sony Corporation
Open the My aibo home screen.
1
Do either of the following depending on the app in use.
On the My aibo app for smartphones:
On the My aibo app for computers:
2
Select [My aibo] - [Settings] - [Wi-Fi settings].
1.
Select [WPS] from [Other].
2.
Select [Wi-Fi settings] on the [Settings] tab.
1.
Select [WPS]. 2.
Select [Turn on WPS on aibo]. 3.
Press the Wi-Fi Protected Setup™ (WPS) button on the Wi-Fi router/access point.
On some Wi-Fi routers/access points, you need to press and hold the WPS button for a few seconds. Refer to the
document supplied with your Wi-Fi router/access point for more information.
3
67