background image

SERVICE MANUAL

Published by Sony Techno Create Corporation

Sony Corporation

Audio Business Group

SPECIFICATIONS

ELECTRET CONDENSER

STEREO MICROPHONE

9-887-969-01

2008A04-1

© 

2008.01

US Model

Canadian Model

Ver. 1.0  2008.01

ECM-957PRO

General

Type 

One-point stereo (employing the Mid-side stereo 

 

system), electret condenser microphone

Microphone cord 

4mm diameter, two core-shielded OFC (Oxygen-free 
copper) cord with Canon XLR-5-12C type connector 
and gold plated L-shaped stereo miniplug

Stand screw 

PF 

1

/

screw

Dimensions Approx. 

40

 × 

183mm (diameter 

×

 length) (1

5

/

×

 

7

 1

/

in.), projecting parts and controls not included.

Mass 

Approx. 330 g (11.7 oz.) including battery and cord

Supplied accessories  Wind screen (1)
 

Microphone holder (PF 

1

/

screw) (1)

 

Microphone stand (1)

 

Carrying case (1) 

Performance

Frequency respone  50 – 18,000 Hz
Directivity Unidirectional

 × 2 

(Directive angel: 90

°  or  120°)             

 (switchable)

Output impedance 

600 ohm ± 30% unbalanced

Sensitivity (directive angle 120

°)

 

Open circuit output voltage 

1

: –37 

± 3 dB

 

Effective output level

 

2

: –40.8 

± 3 dBm

 

Difference between L and R channel sensitivity: Less 
than 3 dB

Power requirements  Normal operating voltage: 1.5 V , R6 (Size AA) 
 battery
 

Minimum operating voltage: 1.1V , R6 (Size AA) 

 battery
 

Battery life: Approx. 200 hours with Sony R6P (SR) 

 battery
Maximum sound pressure level input

 

3

 

 

More than 120 dB

SPL

Dynamic range 

More than 95 dB

Operating temperature range
 

0

°C – 40°C (32°F – 104°F)

0 dB = 1 v / Pa, 1,000 Hz (1 Pa = 10 

μ

bar = 94 dB

SPL

)

0 dBm = 1 mW / Pa, 1,000 Hz

1% wave distortion at 1,000 Hz. (0 dB

SPL

 = 2

 × 

10

3

 Pa)

Design and specifi cations are subject to change without notice.

Notes on chip component replacement

•  Never reuse a disconnected chip component.
•  Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

FEATURES

This microphone is suitable for use in a variety of situations such as at 
concerts or conferences with digital recording equipment (Sony DAT, MD, 
NT (Digital Microcorder) ICD, etc.).

•  The turning capsule function allows both vertical and horizontal 

sound pick-up.

•  The Mid-Side Stereo System provides a natural sound pick up, 

delivering a stereo sound image with superb clarity.

•  The directive angle (between left and right channels) can be set 

to 

90

° or 120° according to the sound source.

Summary of Contents for ECM-957PRO













Reviews: