Sony EA50EH Operating Manual Download Page 97

Page: 97 / 136

Us
in

th
e

Me
n

– With a frame rate of 50 selected in

[

REC FORMAT], when the shutter

speed is 1/50, the shutter angle is 360
degrees.

– With a frame rate of 25 selected in

[

REC FORMAT], when the shutter

speed is 1/25, the shutter angle is 360
degrees.

See page 44 for details on [

REC

FORMAT] setting.

Notes

• When pressing the DATA CODE button, shutter

speed is displayed in seconds regardless of this
setting.

Tips

• If the shutter speed is more than 360 degrees, it

is displayed as an integral multiple of
360 degrees (360° × 2, etc.).

You can adjust the brightness of the LCD
screen. Changes in the LCD brightness are
not affect the brightness of recording
images.

NORMAL

BRIGHT

You can select where to output the display
information, such as time code.

LCD PANEL

Outputs the information to the LCD
screen.

ALL OUTPUT

Outputs information to the HDMI OUT,
COMPONENT OUT and VIDEO OUT
jacks, and the LCD screen. Zebra, peaking
and the frame on the face are also output.

Notes

• Only the time code, zebra, peaking and the

frame on the face are output when [MARKER]
is set to [ON] and a marker is displayed on the
LCD screen.

LCD BRIGHT

DISPLAY OUTPUT

Summary of Contents for EA50EH









































































































































Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands

Sony EA50EH, Operating Manual

Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands