Sony EA50EH Operating Manual Download Page 69

Page: 69 / 136

ay
bac

SteadyShot

Notes

• The exposure correction value (EV), shutter

speed, iris, ISO sensitivity, flash on/off and
white balance are displayed during viewing still
images.

• When you play back the memory card on other

devices, the camera data may be displayed
incorrectly. Confirm the correct camera data on
your camcorder.

• When GPS triangulation data is displayed,

latitude and longitude are displayed in the data
code area.

• If you record without receiving GPS data, bars

such as [--° --' --" -] will be displayed.

You can check the settings of the following
items.
• Audio setup (p. 92)
• Output signal setup (p. 91)
• Functions assigned to the ASSIGN

buttons (p. 61)

• Camera setup (p. 85)
• Recording media information

You can check the estimated used and free
spaces.

• Battery Info

You can check the remaining capacity of
the attached battery.

Press the STATUS CHECK button

Turn the SEL/PUSH EXEC dial

until a desired display shows up
on the LCD screen.

AUDIO

OUTPUT

ASSIGN

CAMERA

MEDIA INFO

BATTERY INFO

Setup items are displayed according to
the settings of the camcorder when it is
turned on.

To hide the display

Press the STATUS CHECK button

Checking the settings in your
camcorder (Status check)

Summary of Contents for EA50EH









































































































































Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands

Sony EA50EH, Operating Manual

Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands