Sony EA50EH Operating Manual Download Page 65

Page: 65 / 136

ay
bac

Your camcorder starts playing the selected movie.

Notes

• If you touch the thumbnail and press the PLAY button, the most recently recorded or played scene is

played back.

Tips

• When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX

screen.

• Touch

during pause to play back movies slowly.

• As you repeat touching

during playback, movies are played back as fast as about 5 times

about

10 times

about 30 times

about 60 times.

• Reduced-size images which enable you to view many movies at the same time on the VISUAL INDEX

screen are called “thumbnails.”

• You can operate playback using the PREV/PLAY/NEXT/STOP/PAUSE/SCAN/SLOW buttons on the

camcorder.

To adjust the volume

Adjust the volume with the VOLUME buttons.

To return to the recording mode

Press the VISUAL INDEX button.

On playing back movies

• Movies recorded using this camcorder may not be played back normally on devices other

than this camcorder. Also, movies recorded on other devices may not play back properly on
this camcorder.

• Standard definition image quality (SD) movies recorded on SD memory cards cannot be

played on A/V devices of other manufacturers.

Play/Pause

Slow/Fast reverse

Stop

Slow/Fast forward

Continued

Summary of Contents for EA50EH









































































































































Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands

Sony EA50EH, Operating Manual

Search results

Summary of Contents for EA50EH

Reviews:

Related manuals for EA50EH

Brands by name

Popular brands