7
Parts Identification
Parts
Identification
Body-pack transmitter
(transmitter: ZTX-B01)
a
Antenna cover
Contains the antenna.
Do not squeeze the antenna cover. Doing so
will weaken the signal that is transmitted,
decreasing the transmission range.
b
BATT (remaining battery) indicator
Indicates the remaining battery charge
when the unit is turned on.
The remaining battery indication only
appears when alkaline dry cell batteries are
being used.
c
Button lock switch
Locks the POWER/MUTING button and
the CHANNEL SELECT button. This
prevents unintentional operations, such as
accidentally turning the power off. The
factory default setting is UNLOCK.
LOCK:
Locks the buttons to disable their
operation.
UNLOCK:
Releases the lock to enable
button operation.
You cannot turn on the unit while this
switch is set to the LOCK position, as even
the power button is disabled. Set the switch
to the UNLOCK position to perform
operations.
d
Audio input connector
Connect the supplied microphone
(DWZ-B50I), or connect a guitar or similar
instrument here using the supplied guitar
cable (DWZ-B50GB).
e
AUDIO/MUTING indicator
Indicates the input level of the audio signal
and the status of the muting function.
f
INPUT switch
Set this based on the connected equipment.
The factory default setting is INST.
INST:
Set to this position when a guitar or
similar instrument is connected.
MIC:
Set to this position when a
microphone is connected.
Caution
Indicator
Status
Lit (green)
Good
Lit (red)
Almost dead
Caution
Indicator
Status
Lit (green)
Audio input present
Lit (red)
Excessive audio
input
Off
Audio input weak or
nonexistent
Blinking (orange) Muting function
enabled (i.e., audio
disabled)
Summary of Contents for DWZ-B50GB
Page 31: ...Sony Corporation ...
