Sony DWR-R01D, Operating Instructions Manual, Page: 12 / 45

12
Parts Identification
Parts Identification
Front Panel
a
POWER switch
Turns the receiver on or off.
Set to the
\ position to turn the receiver on. Set to the a
position when turning off the main power supply.
b
UTILITY (UTILITY menu) button
Press to display UTILITY menu. This button lights up
brightly during UTILITY menu operation.
c
Monitor indicators
One of four indicators lights up corresponding to the
VOLUME control operation.
1/2 : Audio from channel 1 is output from the L channel of
the headphones and audio from channel 2 is output from
the R channel.
1 : Audio from channel 1 is output from the L and R
channels of the headphones.
2 : Audio from channel 2 is output from the L and R
channels of the headphones.
1+2 : Audio from channel 1 and 2 are mixed to be output L
and R channels of the headphones.
d
VOLUME (monitor channel selection/monitor
volume) control
Press to change the audio output from the headphones.
Rotate to control monitor volume.
e
PHONES (headphones) terminal
Connect the headphones here.
3
Monitor indicators
1
POWER switch
d
VOLUME control
2
UTILITY button
1
Display (see page 13)
5
PHONES terminal
2
Controls (see page 14)