Sony DWM-01, Operating Instructions Manual

Page: 28 / 39

28 Setting Menus
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
“Using the Wireless Remote Control Function” on
page 20.
Setting the Audio Input
Level
(INPUT LEVEL)
You can set the input level to the analog
head amp.
Press the + or – button repeatedly to select
the appropriate attenuation level.
The reference levels for the various settings
are as follows:
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
“Using the Wireless Remote Control Function” on
page 20.
Low-cut Filter Setting
(LCF)
The frequency of the low-cut filter can be
set.
OFF: Turns off the low-cut filter.
20 30 40 50 60 70 80 90 100
120 140 160 180 200 220 (Hz):
Low-cut filter is set according to the
selected frequency.
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
“Using the Wireless Remote Control Function” on
page 20.
Power Save Setting
(POWER
SAVE)
To conserve power, this setting allows you
to put all microphone functions to sleep.
ACTIVE: The microphone operates
normally.
SLEEP:
The sleep function is on. During
sleep, the POWER indicator flashes at 2-
second intervals.
To change back to normal
operation
During sleep, press the SET, +, or – button.
You can also use the wireless remote
control to change the receiver back to
normal operation.
Input Attenuation
(dB) Reference input
level (dB SPL) Maximum input
level (dB SPL) Headroom (dB)
MIC 0 94 130 36
3 97 133
6 100 136
9 103 139
3 dB step 3 dB step 3 dB step
18 112 148
21 115 151