Sony DVS-9000 User Manual Download

Page: 790 / 1228

Chap

Sn
aps

ho
ts

790

Snapshot Operations From the Numeric Keypad Control Block

a) The GPI port that can be set is 1 (fixed).

For details of attributes, see “Snapshot Attributes” (page 785).

Note

In the numeric keypad control block, it is not possible to apply the cross-
point hold.

For details, see “Applying snapshot attributes” (page 806)

Press the [ENTER] button.

This saves the snapshot, and the [STORE] button goes off. The [RCALL]
and [STORE STATS] buttons light.

To cancel a snapshot save operation

After saving a snapshot, to cancel the save, hold down the [STORE STATS]
button and press the [UNDO] button.

Recalling a snapshot from the numeric keypad control block

In the numeric keypad control block, press the [SNAPSHOT] button,
turning it on.

This allocates the numeric keypad control block to snapshot operations,
and the [RCALL] button lights.

Press the region selection button corresponding to the region you want to
recall, turning it on. Multiple selections are also possible.

[M/E 1], [M/E 2], [M/E 3], [P/P]:

These select the corresponding M/E-1,

M/E-2, M/E-3, and PGM/PST regions.

[USER 1] to [USER 8]:

These select the User regions.

[DME 1] to [DME 8]:

These select the DME channels.

[ALL]:

This selects all regions.

[RTR]:

This selects the Router region.

[MASTR]:

This selects a master snapshot.

Note

The regions that can be selected simultaneously are those assigned to the
region selection buttons in the numeric keypad control block.

(See

Attribute to apply

Button

Effect dissolve

[+/–/EFF DISS] button

Auto transition

[CLR/AUTO TRANS] button

GPI output

TRIM/GPI ENBL] button

Summary of Contents for DVS-9000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DVS-9000

Reviews:

Related manuals for DVS-9000

Brands by name

Popular brands

Sony DVS-9000, User Manual

Search results

Summary of Contents for DVS-9000

Reviews:

Related manuals for DVS-9000

Brands by name

Popular brands