manualshive.com logo in svg

Sony DVS-9000, User Manual, Page: 372 / 1228

Share
Download
Sony DVS-9000 User Manual Download Page 372

372

Still Image Operations

  

 Chapt

er

 7

 

F

rame

 Memo

ry

4

When you selected a pattern key or external key, if required press [Key 
Invert] in the Still >Composite menu to invert the key.

Image Output

There are two functions related to image output: the reposition function for 
moving the output image, and the lock function for fixing the output image.

Moving the output image (reposition function)

For up to two channels of FM1 to FM8 (one from FM1, FM3, FM5 and FM7 
and the other from FM2, FM4, FM6 and FM8), you can move the output image 
with respect to the screen. The area of the screen around the image that has 
been moved is filled with black. There are two ways of carrying out this 
repositioning.

Normal mode:

 Movement in the horizontal direction is in two-pixel 

increments.

Black and white mode:

 Movement in the horizontal direction is in one-pixel 

increments, and for each pixel moved the color is inverted.

Note

It is not possible to save an image moved with the reposition function directly 
to frame memory.

1

In the Frame Memory menu, select VF3 ‘Reposition/Lock’ and HF1 
‘Reposition.’

The Reposition menu appears. In this menu, you can also enable the V/K 
mode 

(see page 362)

.

2

In the frame memory selection area, select the FM output 

(see page 361)

.

3

In the <Reposition> group, select the movement mode.

Normal:

 Move in normal mode.

Black&White: 

Move in black & white mode.

4

With the knobs, adjust the parameters to move the image.

Knob

Parameter

Adjustment

Setting values

1

Size

Pattern size

0.00 to 100.00

2

Soft

Edge softness

0.00 to 100.00

Summary of Contents for DVS-9000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments