Sony DVS-9000, User Manual

Page: 367 / 1228

367
Still Image Operations
Cha
p
te
r 7
F
ra
m
e Memor
y
6
Press the thumbnail of the clip you want to recall.
7
Press [Recall].
This recalls the still image file, which is assigned to the FM you selected
in step
2 .
To recall in direct recall mode
Direct recall means that pressing a thumbnail immediately recalls the file.
In this mode, only the front thumbnail file is recalled.
1
In step 7 above, instead of pressing [Recall], press [Direct Recall].
2
Press the thumbnail for the file you want to recall.
This immediately recalls the file.
To display the subsidiary file in front
With the direct recall mode on, press [Sub Display], turning it on.
Image Processing
You can combine the background image (a still image file allocated to any of
FM1 to FM8, a freeze image written to temporary memory, or a black signal)
and the input signal.
The following types of processing are available.
Pattern key: Using the signal from a dedicated pattern generator, you can cut
out the background image and insert the signal selected on the frame
memory source bus or a color matte signal. You can adjust the size and
position of the pattern, and add modifiers.
External key: When processing an image in FM1 (3, 5, 7), you can use the
signal selected on the frame memory source bus 2 to cut out the
background image, and fill with the signal selected on the frame memory
source bus 1, or a color matte signal.
When processing an image in FM2 (4, 6, 8), you can use the signal selected
on the frame memory source bus 2 to cut out the background image, and
fill with a color matte signal (always white).
Note
An external key can only be used when the pair mode is enabled (see page
353).
MIX: Mix the background image with the signal selected on the frame memory
source bus or color matte signal. The mix ratio can be set.