Sony DVS-9000, User Manual

Page: 1082 / 1228

Ch
apt
er 19
C
o
nt
rol P
ane
l
S
e
tup (P
an
el)
1082
Operation Settings (Operation Menu)
Settings for the Flexi Pad and Wipe Snapshot Menu
You can select the pattern numbers or register names as the button indications
for Flexi Pad control block and the following menus.
• M/E-1 > Wipe >Wipe Snapshot menu
• M/E-1 > DME Wipe >DME Wipe Snapshot menu
• Misc >Snapshot menu
This setting is also valid in the Multifunction Flexi Pad control block.
1
In the Panel >Operation menu, press [Flexi Pad Mode].
The Flexi Pad Mode menu appears.
The status area shows a list of the items with their settings.
2
Make the following settings as required.
Coupling the transition type selection with the Flexi Pad control block
mode selection: To make the Flexi Pad mode selection change
automatically when [WIPE] or [DME] is selected in the transition
control block, press [Wipe/DME Auto Deleg], turning it on.
Button indications in the memory recall section: When the Flexi Pad
control block mode is [WIPE] or [DME], for the button indications in
the memory recall section, select [Pattern] or [Register Name] in the
<Wipe/DME Display> group. When the mode is [Snapshot], [Effect],
or [MCRO], select [Register No] or [Register Name] in the
<Snapshot/Effect Display> group.
For details, see the following.
• “Wipe Snapshots” in Chapter 5 (Volume 1)
• “DME Wipe Snapshots” in Chapter 6 (Volume 1)
• the figure of the memory recall section in “Recalling the master timeline
in the Flexi Pad control block” in Chapter 13 (Volume 2)
• the figure of the memory recall section in “Saving and Recalling
Snapshots” in Chapter 14 (Volume 2)
• the figure of the memory recall section in “Recalling a Macro Register
and Executing a Macro” in Chapter 16 (Volume 2).
Setting the Button Operation Mode
1
In the Panel >Operation menu, press [Custom Button].
The Custom Button menu appears.
The status area shows a list of the items with their settings.
2
Make the following settings as required.