20
Hookups
Hooking Up the Player
Follow steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the mains leads, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 16).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
A
through
D
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). In order to view progressive signal (525p/625p) pictures
with a compatible TV, projector, or monitor, you must use pattern
A
.
